Monkey Grip Tie Down Black Motorcycle Tie Downs 1000KG Capacity 3M x 38mm - 2 Pack

Secure your bike with a Monkey Grip Motorcycle Tie Down System!  Monkey Grip Motorcycle Tie Down Systems are specifically designed to help you safely tie down & transport your motorcycle, dirt bike, ATV, scooter, pushbikes or other small vehicles.  Webbing tie downs are now widely used in the transport industry. Webbing...

Color : Black

Secure your bike with a Monkey Grip Motorcycle Tie Down System! 

• Monkey Grip Motorcycle Tie Down Systems are specifically designed to help you safely tie down & transport your motorcycle, dirt bike, ATV, scooter, pushbikes or other small vehicles. 

• Webbing tie downs are now widely used in the transport industry. Webbing Tie Downs are light-weight, easy to handle and easy to use. Webbing lashings are more elastic than chains therefore they retain more tension & cause less damage to cargo or paintwork.

• The Monkey Grip Motorcycle Tie Down Range has you covered with restraints that can handle a variety of load sizes & lashing capacities.

• Avoid fines and safely tie down any heavy cargo your hauling! Fines of up to $5,000 for individuals or $25,000 for business may apply. (Depending on the State or Territory) 

Features

S-Hooks with Spring Latch 

• The S-Hook with a spring latch end locking system of this motorcycle ratchet tie down system provides extra safety & reassurance when transporting your vehicle. The S-Hooks are rubber coated to prevent damage & wear. They are also completely UV resistant! 
  

Professional & Safe

• Monkey Grip Motorcycle Tie Downs are designed, manufactured, & tested to Conform to AS/NZ 4380 Australian Standard. Tie Down LC is printed on the strap webbing.

Motorcycle Tie Downs for Any Job!

• Monkey Grip Ratchet Tie downs come in various mechanisms, lashing capacities, webbing widths and lengths.

Product Details

TYPE	SPECIFICATION
Mechanism	Ratchet Tie Down
Size	3 Metre x 38mm webbing
Pack Size	2
Lashing Capacity (LC)	1000KG
Breaking Strength	2000KG
End Fitting (Hook Type)	S-Hooks with Spring Latch
Colour	Black
Strap Material	Polyester (PES) Webbing, UV Resistant
Operating Temperature	- 40°C to 100°C
Australian Standard	Conforms to AS/NZ 4380
Packaging	Retail, hanger

How To Use Ratchet Style Mechanism Tie Downs

Tensioning  

1. Place the long length of webbing over the load and connect the fitting to a solid anchor point.
2. Insert the free end of the strap through the slot in the ratchet spindle. Pull until the slack is removed.
3. Releasing a little slack, now connect the fixed end strap fitting to the second solid anchor point around and connect back to the tie off loop if provided. Ensure the ratchet handle faces outwards. Make sure there are no twists and that the strap is flat over the load.
4. Pull up the slack again and pump the ratchet handle to work the ratchet so there are 2 to 4 layers of webbing around the ratchet spindle until the desired tension is set. Do not allow too many layers of the webbing around the reel as this may jam the ratchet. (Note: Refer to release tension instructions if needing to adjust.)
5. Take care not to over-tighten the strap as this could also damage the load.
6. Push the handle fully down to lock, check that the ratchet mechanism is locked, check no sharp objects are going to damage the fibre strap. Check that the load is stable under the strap and there will be no vibration, rub or flapping. Use protective sleeves to protect the fibre webbing from edges or rough surfaces.

CHECK TIE DOWNS REGULARLY WHEN IN USE DURING THE JOURNEY.

Releasing Tension

1. Pull back the handle to the open position.
2. With 1 hand, pull the release lever. The release mechanism pulls approximately 10mm towards the handle.
3. Using the free hand, pull the webbing out of the ratchet spindle until all the webbing is removed.
4. Let the release mechanism go.