PRO Pilot Bearing Puller 3 Jaw Bushing Gear Extractor Automotive Remover Bearing
- Bearing Puller with Wide Range of Applications The bearing puller tool can be used for disassembly of automotive, motorcycle, machine and generator bearings.
- 3 jaw design, even force: the bearing puller has 3 jaws that can apply pressure evenly to effectively prevent damage and bearing damage and ensure the stability of the bearing during disassembly.
- HEAVY DUTY CONSTRUCTION The bearing puller is made of forged and specially heat treated carbon steel, so our bearing inner pullers have high strength, high toughness and longer service life.
- Easy to use: the inner extractor produces a large pulling force with a slight twist of the small key, is held without slipping and is very firm, which saves time (jaw length 80 mm).
- Instructions for Use The jaw puller jaws can be used for both front and rear mounting. Suitable for all vehicle bearings with an inner diameter of 14 to 38 mm. Note: please balance when using to avoid dam....
The squeegee is very versatile. The pilot bearing puller can pull off all plain bearings with an inner diameter of 1/2"-2". It can be used for bearings of motor vehicles, motorcycles and electric vehicles, machinery, agricultural machinery, etc. It is characterised by high strength, high torsion resistance, good hardness, robustness and practicality (no guide bearings, pump bearings or electric brushes are required).
Specifications:
Material: Carbon SteelColor: BlackScope of application: 14-38 mm / 0.6-1.5 inches. Tensile force range: 50-95 mm / 2.0-3.7 inches. Claw length: 80 mm. Arm length: 86 mm. Length of the roller wire: 175 mm. Hex diameter: 14 mm / 0.6 inches. Length of the bar: 125 mm. Total height: 200 mm / 7.9 inches. Total width: 135 mm / 5.3 inches. Package size: 180 x 140 x 50 mm / 7.1 x 5.5 x 2.0 inches. Package weight: 800g
|
|
|
|---|---|---|
Improved design of the mother |
High quality carbon steel |
3-jaw design |
